How to Change Water Cooler Bottle Without Spilling

As an amazon associate We earn from qualifying purchases, at no additional cost to you.

If your home’s tap water isn’t to your liking and you don’t want to spend your money on expensive water bottles from time to time, a water cooler bottle might be your best bet.

If you already have an in-home water cooler, you’ll always have fresh water on hand. All you’ll need to do is identify a reliable water delivery service provider to deliver the water bottles to your door when you need them.

One thing you need to remember, though is that, you’ll have to replace the bottles on your own. And although the process takes only a few minutes, you need to be extra careful not to spill water during the process.

So, how do you change a water cooler bottle without spilling?

Prepare the Water Bottle

The first thing to do before removing the empty water bottle from the cooler is to wipe the replacement bottle. Use warm, soapy water to remove all the dust on the surface.

After that, wash your hands and ensure that they are sanitary enough to handle the new water bottle.

Get a clean, absorbent cloth and a sturdy chair and place them near the water cooler for easy reach.

Remove the Empty Water Bottle

Before lifting the water bottle from the cooler, ensure that it’s empty or just about empty to avoid splashing washing. Then, lift the bottle straight up from the water cooler to remove it.

Get the absorbent cloth and use it to wipe around the rim of your cooler, where the neck of the water bottle rests.

Set the empty bottle aside and return it to your water supplier later.

Place a Sturdy Chair/Table Next to the Water Cooler

Lifting the water bottle from the chair or table to the cooler is easier than from the floor. Remember the chair you placed near the cooler? Get it next to the cooler and proceed to the next step.

Place the New Water Bottle on the Chair/Table

To insert the water cooler bottle with ease, bend down in front of the water bottle and get into a comfortable position. Your feet should be shoulder-width apart, one foot slightly in front of the other.

Use your dominant hand and grasp the bottle’s neck securely. Next, place your opposite hand under the water bottle.

Keeping your back straight, slowly stand up and set the bottle down on the chair or table you set next to the cooler.

Depending on the type of water bottle you have, remove the cap or tab from its neck.

Insert the Water Bottle in the Cooler

Lift the water bottle from the chair and rest it against the top of your water cooler. Tilt it to a 45-degree angle and allow water to start dripping into the cooler.

As the flow of the water into the cooler starts to increase, tip the bottle into an upright position, and then secure it perfectly onto the base.

And there you have it! Your new water bottle sits securely on your water cooler without spills during the entire process.

Tips and Warnings

Most water bottles come in capacities of 5 or 3 gallons. A 5-gallon water bottle weighs approximately 40lbs. If you can’t handle this weight, switch to a 3-gallon water bottle, which is lighter. Alternatively, you can stick with the 5-gallon bottle but ask for assistance from a friend or family member when changing it.

Always remember to keep your back straight and the water bottle close to your body when lifting it. If you have to change the direction during the process, turn your feet. Don’t twist. This will prevent you from injuring your back.

Never store your replacement water bottles in direct sunlight, as this can encourage algae growth. Instead, always place them in a cool, dry place, such as your kitchen pantry.

If your water always comes in glass bottles, inspect the new bottle carefully for any hairline cracks or chips. Cracked bottles can injure you as you move or lift them.

Conclusion

Although changing a water cooler bottle seems like a pretty easy task, a slight mistake can result in messy spills or injuries. Lucky enough for you, this comprehensive guide should help you carry out the process fast and effectively. Follow the listed steps, and you’ll have your new water bottle in place within minutes.

0dcdf450f320ab82c5707f914b2359bf?s=250&d=mm&r=g
Latest posts by Dr Peter Gleick (see all)